Nilight
Magnetic LED Trailer Towing Light Kit w/ 7 Pin Plug Tail Stop Amber
About this item
- 5-wire tail light systems only: these light kits are suitable for vehicles with 5-wire tail light systems only (with turn signals and brake light separated). It will not work for pickup SUVs with 4 wire tail light system such as 2005 Nissan Frontier 4 x 4 nismo, 2001 Ford F550. If using them for 4-wire vehicles, the brake light will light up in the wrong amber color instead of red color. Please double-check your trailer wiring plug connector before installation.
- Multi-functions: 24ft cable to light with a Standard 7 Pin Plug, fit for 5-7 wire flat Pin Adapter, combined full functions of stop/brake light, tail light, rear Position, direction indicator, reflector, and license plate light(Right light no license plate light), but not has the back up lights; Fit most USA 5 wire systems standard 12V trailer, RVs, campers, trucks, UTEs, UTVs, construction vehicles, loaders, boats, flatbeds, caravans, etc.
- Excellent Brightness: Left lamp has 16 diodes including 6 diodes for license plate light. Right lamp has 10 diodes including 5 Diodes for right turn signal, 5 diodes for tail light. Quality LEDs draw less amperage but outputs optimal brightness, improving great visibility and extend longer lifetime than the incandescent lamp. DOT Compliance to ensure your 100% safety
- IP68 entirely submersible: inside leds and circuit board is fully waterproof sealed to work under water perfectly without electric short risk, excellent tightness makes it be definitely waterproof and submersible
- Easy to install: Comes with 2 strong magnetic on the lights for quick and easy fitting and removal of the light. Just need to insert and secure the 7-pin socket into your existing 7-way trailer plug of the towing vehicle and then well route the wire along the trailer and place the magnetic lights at the rear position, they handle bumpy roads without falling off.
26 diodes including 6 diodes for license plate light. Output super bright red, amber and white light. It comes with 2 strong magnetic on the lights for quick and easy fitting an removal of the light, 24ft cable to light with a Standard 7 Pin Plug, easy to use, plug in and go.
Specification:
- Working Voltage: DC 12V-24V
- LED Light Color: Red, Amber, White
- Number of LEDs: Left 16 Right 10 LED
- Dimensions: 4.31in x 3.94in x 1.56in (L x W x H)
- Connector: Standard 7 Pin Plug
- Cable Length Between Two Lamps: 7.75FT
- Cable Length From Lamps To Plug: 24FT
- Material: ABS Housing & PC Lens
- IP68 waterproof rate
- Lifespan: Over 50000 Hours
Wiring Guide:
If you don't have a 7pin connector, you can also use the hardwired method, please cut off the 7 pin connector on the lights and hardwire it to your vehicle
- Black Wire: Running Light
- White Wire: Ground Wire
- Red Wire: Brake Light
- Yellow Wire: Left Turn Light
- Green Wire: Right Turn Light
NOTE:
- Not fit for 4 wire connect to 7-way round blade trailer adapter.
- Please check your trailer wiring plug connector before order. Thanks.
Main Advantages
SUPER BRIGHT 26 LEDs
26PCS led chips with clear transmittance PC cover output stable high brightness, emits amber, red and white 3 colors of light, has stop,Tail, Indicator & Fog Light Functions. Improve the drive security and avoid accidents.
Fully Sealed Waterproof Design
The whole light adopts a sealed design to protect the light from damage in severe weather such as rainstorm and snowstorm. Enhance the waterproof ability of the light, and extend the lifespan.
Easy Installation
Comes with 2 strong magnetic on the lights for quick and easy fitting and removal of the light. Just need to insert and secure the 7-pin socket into your existing 7-way trailer plug of the towing vehicle. Strong magnets can keep them running on rough roads without falling off.