Nilight
Turn Signal Switch Amber 4Pin ON Off ON Rocker Switch Laser Etched SPDT Toggle Switches 12V 20A 24V 10A Jumper Wires for Cars RVs Boats Campers Trailers
- Specification: 4 Pin Rocker Switch, Rated at 12V DC/20 Amp, 24V DC/10Amp. Switch function: ON-OFF-ON, amber backlight.
- Spdt Switch: The turn signal switch has 3 positions, you can control the turn signal light to left and right by pressing the switch to the corresponding positions. The upper right arrow pattern stands for right turn, and the lower left arrow pattern stands for left turn. The middle words “TURN SIGNAL” stands for nothing and it’s an off position.
- Sturdy And Durable: This switch is made of high-quality plastic and well-conductive pins; The laser-etched pattern is not easy to fade away and it’s built-in two premium LEDs, emits soft light to illuminate the patterns, easy for you to find the switch in the dark.
- Easy Installation: This 4 Pin rocker switch fits Nilight rocker switch panels and switch holders, it’s the same size with other 5 Pin and 7 Pin rocker switches. Suitable for installing on any 12/24V DC cars, trucks, RVs, Trailers, Campers etc to control the signal lights.
- Package Includes: 1x 4 pin rocker switch, 1x jumper wires set, 1x wiring diagrams.
Features
ON-OFF-ON 4 Pin Rocker Switch
- Material: Superior ABS+PC; Rated at 12V 20A and 24V 10A DC.
- SPDT design (Single Pole Double Throw); Built-in 2 LEDs, laser-etched pattern.
- Mounting Hole Size: 1.43 inch(37mm) x 0.84 inch(21.3mm).
- Application:
The switch is very flexible for turning on or off. It can stand up to 10,000 times pressing under normal use.
High quality 14 gauge jumper wires, the Tin-plated copper terminals on the wire is of good stability, wear resistance, corrosion resistance.
Made of ABS and PC of premium quality, the switch is impact and heat resistant and it's flexible for turning on or off. prolonging the device life.
This switch is simple to install, product comes with a wiring diagram which make it easy to wire the jumper wires in two seconds.
- PIN 1&3- Connect the Left/Right Turn Signal, or outgoing to relay, accessory and equipments
- PIN 2 - Connect the positive battery terminal
- PIN 7 - Connects the negative battery terminal
- The upper right arrow pattern stands for right turn, and the lower left arrow pattern stands for left turn.
- The middle words “TURN SIGNAL” stands for nothing and it’s an off position.
The 4 pin rocker switch can be installed on Nilight rocker switch holder housing for better using effect.
It can also be replaced to any defective 4 PIN switches. Convenient and cost-effective.
The switches can be replaced with any defective 4 PIN SPST switches, convenient and cost-effective.
It's dimension is the same as the original factory switch on UTV vehicle, which can replace damaged UTV switches without the need for drilling holes.
Suitable for most DC 12V-24V cars, UTV/ATV, trucks, trailer, RV, caravan, bus, marine boat, yacht, airplane, etc.
suitable for UTVs and ATVs.