Nilight
Turn Signal Switch with Flasher Relay Kit 4PIN ON Off ON Rocker Switch w/Blue LED Laser Etched SPDT Toggle Switches 12V 20A 24V 10A Jumper Wires for ATV UTV Tractor Motorcycle
- Spdt Switch: The turn signal switch has 3 positions, you can control the turn signal light to left and right by pressing the switch to the corresponding positions. The upper right arrow pattern stands for right turn, and the lower left arrow pattern stands for left turn. The middle words “TURN SIGNAL” stands for nothing and it’s an off position.
- Specification: 4 Pin Rocker Switch, Rated at 12V DC/20 Amp, 24V DC/10Amp. Switch function: ON-OFF-ON, green backlight.
- Flasher Relay: 3 wire electronic LED 12V flasher relay Using international standard pins, plug and play and easy installation. This will solve LED related turn signal problems such as rapid flashing, not flashing, or bulb burnt out warning on dashboard.
- Fitment: The turn signal switch kit suitable for installing on any 12/24V DC cars, trucks, RVs, Trailers, Campers and most motorcycle , ATV, UTV, golf cart etc to control the signal lights.
- Packaging Includes: 1x 4 pin rocker switch, 1x Flasher Relay, 5x blue Connectors, 1x jumper wires set, 1x wiring diagrams.
Features
ON-OFF-ON 4 Pin Rocker Switch
- Material: Superior ABS+PC; Rated at 12V 20A and 24V 10A DC.
- SPDT design (Single Pole Double Throw); Built-in 2 LEDs, laser-etched pattern.
- Packaging includes: 1x 4 pin rocker switch, 1x Flasher Relay, 5x blue Connectors, 1x jumper wires set, 1x wiring diagrams.
- Application:
The switch is very flexible for turning on or off. It can stand up to 10,000 times pressing under normal use.
High quality 14 gauge jumper wires, the Tin-plated copper terminals on the wire is of good stability, wear resistance, corrosion resistance.
Made of ABS and PC of premium quality, the switch is impact and heat resistant and it's flexible for turning on or off. prolonging the device life.
Flash relay adopts international standard pin, plug and play, easy to install. It can play the role of overload, overcurrent,short circuit protection.
- PIN 1&3- Connect the Left/Right Turn Signal, or outgoing to relay, accessory and equipments
- PIN 2 - Connect the green wire of the flash relay
- PIN 7 - Connects the negative battery terminal
- The upper right arrow pattern stands for right turn, and the lower left arrow pattern stands for left turn.
- The middle words “TURN SIGNAL” stands for nothing and it’s an off position.
The 4 pin rocker switch can be installed on Nilight rocker switch holder housing for better using effect.
It can also be replaced to any defective 4 PIN switches. Convenient and cost-effective.