Nilight Specially Customized for 6 Modes Amber White Light Bar Strobe Wiring Harness Kit 16AWG 10 Feet 2 Leads Remember Function Reset Function, 2 Years Warranty

: In stock

$21.99 $24.99

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question

Tags:

files/payment2.png

About this item

  • Upgraded Version Wiring Harness: Regulate mode in turn by the mode button(white/amber/white & amber/white strobe/amber strobe/ white & amber strobe). The light bar will remember the mode you last used, so you won't be annoyed by switching modes frequently. And always keep sync and the same lighting mode, you won't be bothered by the out-of-sync light mode
  • Two Available leads 10 feet extendable wiring harness, with two sets of light output connectors, the wiring harness can hook up two strobe light bars within 180W at the same time. The black wire is connected to the negative pole, the red wire is connected to the positive pole, and the yellow wire is used for the lighting mode
  • Circuit protection: Power relay for safety protection and conversion circuit. Blade fuse protects the circuit when an over-current or short circuit occurs
  • Wide application: The wiring harness is specially customized for NILIGHT 6 mode Amber White light bar strobe, suitable for almost all 12V battery vehicles, such as jeeps, ATVs, UTVs, cars, motorcycles, ships, yachts, and trailers
  • Package includes: 1 x wiring harness kit, 3 x blade fuses, 6 x connectors,1x wiring diagram

Products Nilight Specially Customized for 6 Modes Amber White Light Bar Strobe Wiring Harness

Main Features

Dual Switch

Dual Switch

The on/off button is used to turn the power on and off, and the mode button is used to switch between six modes. Press the mode button for 3s to reset the light modes.

Automotive Relay

Automotive Relay

The relay is high quality made with well-conductive pins and a high-quality copper coil. It effectively protects the circuit and the lighting system.

Blade fuse with water-resistant fuse holder

Blade fuse with water-resistant fuse holder

The inline blade fuse with a water-resistant fuse holder act as the First Line of defense against overcurrent and short circuit which is more scientific and safer. Four-wire connectors are included for safer connections.

Two Leads

Two Leads

With two sets of light output connectors, the wiring harness can hook up two strobe light bars within 180W at the same time.

With Adhesive Backing for Easy Mounting, Put It Where You Want


Wiring Harness Kit 16AWG 10 Feet 2 Leads

Customized Design for NILIGHT 6 Modes Amber White Light Bar Strobe 


6 Modes Amber White Light Bar Strobe

All Orders gets free standard delivery.

  • Standard delivered 7-10 Business Days
  • Express delivered 3-7 Business Days

Orders are processed and delivered Monday-Friday (excluding public holidays)


all customers enjoy free returns.

Proposition 65 Warning for California Consumers

WARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to www.P65Warnings.ca.gov/passenger-vehicle

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Nilight Specially Customized for 6 Modes Amber White Light Bar Strobe Wiring Harness Kit 16AWG 10 Feet 2 Leads Remember Function Reset Function, 2 Years Warranty

$21.99 $24.99

Customer Reviews

Based on 78 reviews
79%
(62)
21%
(16)
0%
(0)
0%
(0)
0%
(0)
E
Efe Ademayowa
Mode switch pigtail a little large for firewall pass through

Harness works great, quick and easy to install, only issue I had was the mode switch pigtail was a little large to push into firewall pass through and it could use an additional 2’ to 3’ of wire on mode switch end

E
Efe Ademayowa
Mode switch pigtail a little large for firewall pass through

Harness works great, quick and easy to install, only issue I had was the mode switch pigtail was a little large to push into firewall pass through and it could use an additional 2’ to 3’ of wire on mode switch end

C
Clementine Durgan
Love

 Magnifico gracias

C
Clementine Durgan
Love

 Magnifico gracias

K
Karina Hudson
Quality was the first thing I noticed

When I received the box in the mail and opened it the quality of the wiring harness stood out to me. Can’t wait for some good snow storms to try my new stuff out with

R
Rashad Kitovu
Good product for the price

Super easy install and work as advertised. Been on the truck for almost a year and have had no issues except for one of the brackets cracking. Contacted the company, gave them my information and they sent a replacement right out. Great customer service!

K
Karina Hudson
Quality was the first thing I noticed

When I received the box in the mail and opened it the quality of the wiring harness stood out to me. Can’t wait for some good snow storms to try my new stuff out with

R
Rashad Kitovu
Good product for the price

Super easy install and work as advertised. Been on the truck for almost a year and have had no issues except for one of the brackets cracking. Contacted the company, gave them my information and they sent a replacement right out. Great customer service!

B
Banji Gbogboade
Great Product

It’s the only rocker switch that I’ve been able to find that works for 6 modes. Looks great on instrument panel and works like a charm. 👍

B
Banji Gbogboade
Great Product

It’s the only rocker switch that I’ve been able to find that works for 6 modes. Looks great on instrument panel and works like a charm. 👍