About this item

• 15 Mins Installation: OE Standard headlights for 1994 1995 1996 1997 1998 Chevy Silverado 1500 2500 3500/Tahoe/Suburban/C10/CK, No Modification or Drilling Needed.
• Waterproof: Our 94 95 96 97 98 Chevy Silverado 1500 2500 3500/Tahoe/Suburban/C10/CK headlights are IP65-rated completely sealed to prevent moisture from intruding into the housing. Ventilation Hole regulates temperature to avoid fogging and keep the headlights bright and clear.
• Safer Drive: Nilight headlights provide clearer and longer vision for driver to see the deer, wild animals, falling rocks or other obstacles at night in advance to reduce the possibility of danger.
• DOT Compliance: DOT & SAE compliant to ensure driving safety for you and oncoming driver. Also, the adjusting screw can assist you to adjust the beam level and make it a perfect lighting.
• Packages: Includes driver's side and passenger's side. (Bulbs are NOT included) Save all the hassle, damage and high cost for refurnishing your old headlights, a new set of headlight assembly would be your best option.

Chevy Tahoe/Chevy Suburban/Chevrolet Silverado Headlight Assembly

Chevy C/K Series 1500 2500 3500/ Chevy Tahoe/Chevy Suburban/Chevrolet Silverado 1994-1998

• Headlights are one of the most important components of your vehicle, as they allow you to see the road ahead clearly and drive safely during the night and in any bad weather that may arise. Therefore, your safety is our first concern.
• All of our products are DOT and SAE compliant. We persevere in rigorous tests on the strength, durability, visibility as well as longevity of the material to make sure that consumers receive high-performance products.
• High Beam: 9005, Low Beam: 9006, LED DRL
• OEM Part Number: ‎15034929, 15034930
• PARTSLINK: GM2502101, GM2503101

Feature

Safety First

Brings a new look to your vehicle

Increases visibility of road markings, traffic signs, and wild animals

Gives you and your family safer nighttime driving

High Performance

Strong sealing, ensure excellent waterproof & dust-proof

Scientific vent design to avoid moisture

Easy to exhaust, anti-fogging.

DOT & SAE Compliance

100% OE Standard, just Plug & Play

DOT & SAE to ensure full illumination and maximum safety

Strictly tested to ensure the optimum performance and longevity

Temperature&Humidity Test

To ensure that the unit can withstand a wide range of temperature without reduce light output safety.

Dust Test

To ensure the unit is preperly sealed against harmfull road dust and debris.

Salt Spray Test

To ensure that the unit can withstand against oxidation caused by salt on the coastal area and from winter condition.

Moisture Test

To ensure that the unit do not cause moisture buildup leading to reduce visibility.

COMMON CAUSES OF HEADLAMP CONDENSATION

• 1. Large changes in daily temperature (+/-30F/1 5C)
• 2. Water vapor easily collects as dew point or humidity increases
• 3. Leaking seals on bulbs and/or bulb sockets
• This is a common occurrence and won’t affect the headlight function

HOW TO SOLVE:

• 1. Check that all vents are free from blockages. Turn on the low beam for 20 mins to raise the headlight temperature and evaporate condensation.
• 2. Remove bulbs to allow moisture to evaporate from inside the housing. Heat with a hairdryer or heat gun at a low temperature to speed up the process.
• 3. Leaking seals on bulbs or bulb sockets. Put moisture-absorbing silica-gel desiccant packet inside the headlight.