We will send you an email to reset your password.
Related Video
About this item
Easy to install and use: 7-pin on-off rocker switch with DPDT design (double pole double throw), simple installation, can control 2 circuits.
Cool illuminated light: Built-in two premium LEDs Emit soft light to illuminate the patterns, easy for you to find the switch in the dark.
Sturdy and durable: Made of high-quality plastic and well-conductive pins; laser-etched pattern, not easy to fade away.
Wide application: Available for controlling LED light bars, LED work lights, fog lamps, driving lights, headlights, taillights, off-road lights, etc.
Specification
Material: Superior ABS+PC; Rated at 12V 20A and 24V 10A DC.
SPST design (Single Pole Single Throw); Built-in 2 LEDs, laser-etched pattern.
Mounting Hole Size: 1.43"(37mm) x 0.84"(21.3mm).
Application:
Fits most cars, SUVs, ATVs, UTVs, 4X4, motorcycles, trucks, Jeep Wrangler, boats, yachts, and other off-road vehicles.
Mainly used for controlling LED light bars, LED work lights, fog lamps, driving lights, headlights, taillights, off-road lights, boat lights, etc.
Features
Durable In Use
The switch is very flexible for turning on or off. It can stand up to 10,000 times pressing under normal use.
Easy Installation
This switch is simple to install, product comes with a wiring diagram which makes it easy to wire the jumper wires in two seconds.
Premium Jumper Wires
The jumper wires are made of high-quality 14 gauge wires.
The Tin-plated copper terminals on the wire are of good stability, wear resistance, and corrosion resistance, which improves the oxidation resistance of copper and maintains its conductivity better.
Excellent Product
Made of ABS and PC of premium quality, the switch is impact and heat-resistant. all patterns are laser etched directly onto the switch surface to ensure long-lasting durability.
Applications
Use on Marine Boat
Marine-grade Construction and IP65 Waterproof: It adopts a high-quality Aluminum panel, Scratch-proof, and Corrosion Resistant, with a rubber-sealed cap for all sockets dust-tight and debris-proof.
Wide Application
The product is suitable for controlling all electronic equipment on board. Available for upgrading headlights switch, fog light switch, wide light switch, car refrigerator switch, and car vacuum cleaner switch replacement. etc.
Car Electronic Device
product is suitable for UTVs and ATVs.
Installation is simple and can be mounted horizontally or vertically. You can even use it at -25°(Min) or 80°(max). Suitable for most DC 12V-24V cars, UTV/ATV, trucks, trailers, RV, caravans, buses, marine boats, yachts, airplanes, etc.
$9.99
7Pin Laser On/Off Momentary Winch Rocker Switch Blue
Fast service very good quality work better than expected.
Added a Bandlands 3500 ZXR winch to my Kawasaki Mule. I kept the winch wiring harness and ran it up to the mule dash knock out. I didn’t worry about having it lit all the time. Red was + black to winch in (1) blue to winch out (3).
Facile d’installation!
The toggle that came with my new winch did not allow for custom mounting in the dash of my side by side. This switch allows for a nice custom fit. It does not come with a template for mounting so I had to take some measurements and cut a rectangular hole in the dash. Once I got the hole size right, the switch clicked in and locked. It has a nice tight fit. The wiring harness is detailed in the instructions and easy to hook up. The switch, I found only lights up when actuated. The switch is wired to a relay for the winch so that only low current passes through it.
The switch came as discribed with jumper wires included, it was pretty easy to figure out and install, I was able to set it up so it's lighted when the key is on. I did have to make the dash hole slightly larger on 2017 ranger xp 900.
Did a dash upgrade after our winch button broke in several ways. We wanted to move the winch button to the dash and fix the ugly mess the previous owner had inflicted on the dash.I will say we currently have removed this button and put the OEM switch back in. There's nothing wrong with the button, but it doesn't light up properly with the factory harness connected to it. It OPERATES the 4WD properly with the factory harness in, but none of the lights work. After doing this upgrade in 30 degrees and 30mph winds with snow, we didn't have the patience to rewire the OEM harness to have lights in the switch. Maybe in the spring will rewire the harness and put this switch back in.
The switch is well made, works perfectly and the light can be operated separately from your light switch if needed. I would highly recommend.
I used this switch to have in cab winch controls in my jeep. So far it was worked great. the back light on it is bright enough to see but not overwhelmingly bright. Bought a second one to use on another winch as well. Nice being able to have full control of my winch inside the vehicle but still being able to use the stock controller outside of the jeep as well.