2003-2006 Chevy Silverado 1500 1500HD 2500 2500HD 3500 2007 Chevy Silverado 1500 2500 3500 Classic Taillight Assembly
$89.99
California Residents: Prop65 Warning
We will send you an email to reset your password.
Related Video
About this item
Nilight Chevy Silverado Taillight Assembly
Compatible with:
Taillight Detail:
Features :
Replacement Part:
Superior Material
Boost Night time Visibility
Advanced taillights make your vehicle highly visible to other drivers and passengers.
Impact-resistant Lens
To meet or exceed the OE ones in function upgraded materials, which are UV & shock-resistant to prevent yellowing or cracking for a longer lifespan.
Durable Taillight Assembly
Durable tail light assembly with bulb for high performance and long life.
One-way Vent
The structure is well sealed to keep water and dust from getting inside, plus one-way vents help keep moisture out due to temperature differences.
Strickly Test
Temperature & Humidity Test
To ensure that the unit can withstand a wide range of temperature without reduce light output safety.
Dust Test
To ensure the unit is preperly sealed against harmfull road dust and debris.
Salt Spray Test
To ensure that the unit can withstand against oxidation caused by salt on the coastal area and from winter condition.
Moisture Test
To ensure that the unit do not cause moisture buildup leading to reduce visibility.
Installation
Step 1
Open the tailgate, loosen the screws to remove the taillight.
Step 2
Remove factory taillight sockets and bulbs. (Bulbs are included. You can use the factory bulbs.)
Step 3
Connect the new tail light plugs to original sockets.
Step 4
Located taillight assembly, connect taillight harness, seat taillight assembly in place. Professional Installation is highly recommended.
COMMON CAUSES OF TAILLIGHT CONDENSATION
1. Large changes in daily temperature(+/-30℃/105℉)
2. Water vapor easily collects as dew point or humidity increases I
3. Leaking seals on bulbs and/or bulb sockets
This is a common occurrence and won’t affect the taillight function
HOW TO SOLVE:
1. Check that all vents are free from blockages. Turn on the low beam for 20 mins to raise the taillight temperature and evaporate condensation.
2. Remove bulbs to allow moisture to evaporate from inside the housing. Heat with a hairdryer or heat gun at a low temperature to speed up the process.
3. Leaking seals on bulbs or bulb sockets. Put moisture-absorbing silica-gel desiccant packet inside the taillight.
$89.99
California Residents: Prop65 Warning