Offroad Truck Led Light Bar 15 Inch Triple Row Combo Roof Grille Bumper Hood For Jeep UTV ATV | 12V 5 Pin Rocker Switch 16 AWG Harness Kit 2 Leads
Offroad Truck Led Light Bar 15 Inch Triple Row Combo Roof Grille Bumper Hood For Jeep UTV ATV | 12V 5 Pin Rocker Switch 16 AWG Harness Kit 2 Leads is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Delivery and Shipping
Delivery and Shipping
International Shipping
Nilight is shipping worldwide covering North and South America, Europe, Asia, Africa, Oceania and more.
We employ the services of major, trusted international carriers to ensure your package arrives at your destination safely.
U.S. domestic orders are shipped from our USA warehouse for the fastest delivery times but exceptions may occur.
Shipping Time
U.S. domestic shipping: about 3-7 Working Days
International shipping: about 8-15 working days
A standard processing time of up to 48 hours is required before the order is shipped out.
Due to challenges posed by the pandemic, our carrier is temporarily experiencing shipping delays, which may delay your delivery. We are always work to get your package to you as quickly and safely as possible.
Shipping Cost
We offer free shipping on all of our products to customers in the Continental U.S. when orders over $19.99. Customers in other regions need to pay additional shipping costs(Specific amount please kindly refer to your checkout page).
Tracking
Your tracking number will be sent in email immediately after we ship the order out. You may follow the link in the email to check the estimated arrival time of your order.
(Please note that tracking information will only be updated online in 1 working day after your order has been shipped.)
Description
Description
About this item
- SUPER BRIGHTNESS: Combo beam with triple row and nest reflector cup design in the middle for extreme light efficiency
- UPGRADING REFLECTOR CUP: The broad reflective plate on both sides allows multi-angle refraction, ideal for ambient illumination
- TWO LEADS AVAILABLE: 12 feet wiring harness, two sets of light output connectors for dual light fixtures less than 180W
- WIDE APPLICATION: Suitable for almost all 12V battery vehicles, such as jeeps, ATVs, UTVs, cars, motorcycles, ships, yachts, and trailers
- PACKAGE INCLUDE: 1PC 15 Inch LED light bar, 1PC 5Pin Rocker Switch Wiring Harness Kit
Specification
15 Inch Triple Row Led Light Bar
Beam Pattern: Flood Spot Combo Beam
Operating Voltage: 9-30V DC (fits 12V, 24V vehicles)
Working Lifespan: Over 30,000 hours
Working Temperature: -40~85 degrees Celsius
LED Color Temperature: Pure White 6000K-6500K
Material: 6063 Aluminum Alloy Profile, High quality Led Chips, PC Lens
Waterproof Rate: IP67; Waterproof, dustproof, quakeproof, and anti-corrosive.
12ft Universal Wiring Harness Kit - Two Leads
2 sets of light connectors to light fixtures; Operating Voltage: 12V DC
Wire Gauge: 16 AWG; Max Wattage: 180W; Max Ampere: 15A
5 pin on-off rocker switch; DC 12V automotive relay, inline blade fuse with three extra fuses
Features
Triple Rows, Brighter Light
The special tri-row design contains more LED chips than dual rows light bars in the same sized, super-bright combo beam illuminates the road ahead, wider lighting area.
Outstanding Waterproof Property
The Led light bar is well sealed by a waterproof rubber pad and silicone sealing strip, the outer protective cover protects against water and dust.
Effective Heat Dissipation
High-quality heat conduction silicone gel together with redesigned aluminum alloy housing, providing a superior cooling effect for a long working lifespan.
Rocker Switch
The switch is very flexible for turning on or off. It can stand up to 10,000 times pressing under normal use. Made of ABS and PC of premium quality, the switch is impact and heat-resistant. The high-quality pin is of good electrical conductivity.
Relay
Adopted high-quality materials, the power relay plays an important part in safety protection and circuit conversion. It effectively protects the circuit and the lighting system.
Blade fuse with water-resistant fuse holder
The inline blade fuse with a water-resistant fuse holder act as the First Line of defense against overcurrent and short circuit which is more scientific and safer. Four-wire connectors are included for safer connection.
Applications
Off-Road Lighting: Jeeps, 4x4, Cars, ATV, UTV, SUV, Truck, Trailer, Forklift, Trains, Boat, Bus, Outdoor lighting, etc.
Other Lighting: Excavator, Dozer, Road Roller, Crane, Tractor, Harvester, Grain Drill, Mower, Snowplow, Fire engine, Rescue Vehicle, Camping, Mining, Construction Lighting, etc.
Household Lighting: Garden, Backyard, Garage, Indoor Lighting. (Note: Use a voltage transformer/converter to convert the AC 110-120V to DC 12V for indoor use.)
Note:
They are aftermarket parts. NOT D.O.T. approved. Do not use if D.O.T. is required. For off-road use only.
Before installing this product, please check your state/provincial and local/municipal laws and regulations.
Please finish the installation by professionals or install the wiring harness under the guidance of professionals.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
