Motorcycle SAE to Dual USB Car Charger Adapter

Related Video

About this item

• Efficient Charge: Dual USB port support QC 3.0 fast charging technology. Allow you to charge 2 devices silmultaneously. Allow you to charge two devices simultaneously at full speed with 5V 3.4A/9V 2.5A/12V 2A. If your device supports QC 3.0 fast charging or SCP and FCP Charging Technology. Then this device would be a best choice rather than the traditional 2.4A/3.1A Motorcycle Phone Charger. It works for all usb-powered devices. makes the charger 40% faster than conventional chargers.
• LED Voltmeter: It has a voltmeter on top, clearly shows the current readings of working volts, easily notice the voltage condition of the batteries. You can also check the item's on-off status by observe the LED light status. When you turn off the switch, the voltage will not display and vice versa.
• Independent On Off Switch: Some people would worry about the battery being drained off with the item powered on for a long while. This USB has an on off switch and we would recommend turning it off when you're not using it so that the battery will not drain off. This item is equipped with a waterproof rubber cap, it can keep the USB charger and switch from rain and dust by closing the caps when you are not using it. Great for all weather conditions.
• Easy Installation and Connection: 2 Power Method: A: The product is designed with an SAE interface, which can be connected directly to the battery with the original SAE interface. B. It is also equipped with a SAE/O Ring harness(built in a 10A inline fuse), which can be directly connected to the battery and is more convenient to install. 2 Installation options. A: Install to any 7/8inch handlebar with the O shape mounting bracket. B: Mount with pad bracket and screws, it can be mounted to almost any surface not only on the handlebar, but also on auto cars, trucks, boats, RVs, campers etc.
• Perfect Wire Length: Product length: 42.5 inch (from the pigtail of the item to the end of SAE receptacle), SAE to O ring wiring harness: 4.53 inch. It's long enough to connect to the battery. The Motorcycle SAE to USB phone Charger's input is 12 volt, and the output is 5V 3.4A/9V 2.5A/12V 2A for Both USB Port. Smart IC Adjust the output Electricity for your Device Automatically.
• Package: Motocycle USB Adapter, SAE Extension Cable, Handlebar Mounting Bracket, Screw Mounting Bracket, Non-slip Washer, Large Screw, Small Screw, Handlebar Fixing Screw.

Output: 5V/3.4A, 9V/2.5A, 12V/2A

Product material: ABS

Independent On/Off Power Switch

Dual 3.0 USB Fast Charger

Two installation options: Screw mounting and handlebar mounting

Motorcycle Charger SAE to USB Car Charger Adapter for Phone, GPS, Table

Wire Length:

• From the pigtail of the item to the end of the SAE receptacle: 42.5 inches)
• SAE to O ring wiring harness: 4.53 inches.

FITMENT: Apply for the diameter of 7/8in grips or any surface.

This USB charger not only fits 12V motorcycles, bicycles, scooters, ATVs, snowmobiles, and UTVs. But also fits automotive cars, SUVs, RVs, Campers, trucks, tractors, etc.

An ideal phone charger meets your charging needs. This device would be the best choice rather than the traditional 2.4A/3.1A Motorcycle Phone Charger. It works for all USB-powered devices. makes the charger 40% faster than conventional chargers.

Features

LED Digital Voltmeter

It has a voltmeter on top, clearly shows the current readings of working volts, easily notice the voltage condition of the batteries. You can also check the item's on-off status by observe the LED light status. When you turn off the switch, the voltage will not display and vice versa.

Independent switch

An Independent ON/OFF power switch saves power and prevents the battery from draining when idle. This switch controls both the voltmeter and the USB port. No worrying about the battery being drained off with the item powered on for a long while.

Dual USB Fast Charging

Dual USB QC3.0 Super Quick Charger can charge 2 devices at the same time. The built-in intelligent IC can automatically adjust the output power of the device to achieve multiple protection effects. Even if your device does not support fast charging, with the smart IC system, it will not harm your battery and charge it safely.

Waterprrof and Dustproof

The waterproof and dustproof rubber USB cover protects the internal circuit and keeps the USB charger and switch from rain and dust by closing the caps when you are not using it. and effectively prolongs its service life. Great for all weather conditions.

Fused SAE to Oring cable

It's designed with a 10 A fused extension cord for safer phone charging.

The SAE to O ring wiring harness is an option to connect to the pigtail of the USB charger. The O ring can attach to your battery positive and negative directly.

Easy Installation and Connection

The product is designed with an SAE interface, which can be connected directly to the battery with the original SAE interface. The Length is 42.5 inches (from the USB charger to the SAE pigtail). It's long enough to connect to the battery and can be directly connected to the battery and is more convenient to install.

Easy Installation

We offer 2 mounting options for this item.

A: Install to any 7/8-inch handlebar with the O shape mounting bracket.

B: Mount with pad bracket and screws, it can be mounted to almost any surface not only on the handlebar but also on auto cars, trucks, boats, RVs, campers etc.