4.4 Inch Aluminum Housing Tail Light 2 PCS 16 LED Red Running Brake Turn Signals Marker Lights Surface Mount IP67 Waterproof for 10-30V RV Camper Trailer Truck Bus Boat
4.4 Inch Aluminum Housing Tail Light 2 PCS 16 LED Red Running Brake Turn Signals Marker Lights Surface Mount IP67 Waterproof for 10-30V RV Camper Trailer Truck Bus Boat is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Delivery and Shipping
Delivery and Shipping
International Shipping
Nilight is shipping worldwide covering North and South America, Europe, Asia, Africa, Oceania and more.
We employ the services of major, trusted international carriers to ensure your package arrives at your destination safely.
U.S. domestic orders are shipped from our USA warehouse for the fastest delivery times but exceptions may occur.
Shipping Time
U.S. domestic shipping: about 3-7 Working Days
International shipping: about 8-15 working days
A standard processing time of up to 48 hours is required before the order is shipped out.
Due to challenges posed by the pandemic, our carrier is temporarily experiencing shipping delays, which may delay your delivery. We are always work to get your package to you as quickly and safely as possible.
Shipping Cost
We offer free shipping on all of our products to customers in the Continental U.S. when orders over $19.99. Customers in other regions need to pay additional shipping costs(Specific amount please kindly refer to your checkout page).
Tracking
Your tracking number will be sent in email immediately after we ship the order out. You may follow the link in the email to check the estimated arrival time of your order.
(Please note that tracking information will only be updated online in 1 working day after your order has been shipped.)
Product Description
Product Description
- Super Bright LED: Equipped with 16 pcs ultra bright 2835 SMD LEDs, outputting two levels of brightness red light. High brightness is for brake light/turn signals light. Low brightness is for running light/tail light/marker light. Ensure a better visibility and safety at day and night
- Aluminum Housing: Compared to plastic shells, aluminum shells can accelerate heat dissipation, improve the service life and performance of the entire light. And there is no need to worry about the bottom shell breaking due to excessive force during installation
- IP67 Waterproof: The PC lens and aluminum shell are tightly fitted, with an internal sealed waterproof design. At the same time, glue is also added to the wires position on the back. Reaching IP67 waterproof level, lights can be used in rainy and snowy weather without worrying about water ingress
- Surface Mount: Comes with necessary washers, bolts, and nuts for installation. The installation can be completed in ten minutes. Each light has a foam pad, which can be used to mark the positions that need to be drilled. The foam pad can also effectively protect the surface of the car
- Widely Used: Fit for almost 10-30V DC Vehicles, such as trucks, trailers, tractors, semi-trailer, horse trailer, travel trailer, dump Truck, camper, RVs, bus, boat, special vehicle, etc
Nilight 4.4Inch Aluminum Housing Red Brake Turn Signals Tail Light
- LED Quantity: 16pcs Red 2835 SMD LEDs
- Material: PC Lens and Aluminum Housing
- Working Voltage: 10-30V DC/ Waterproof Rate: IP67
- Two Modes: Output high and low brightness, work as turn/brake/stop light and tail light
- Package Include: 2PCS 4.4inch 16LED tail light, hardware pack and foam pads
Features
The tail light bottom shell is made of aluminum material, which can better accelerate heat dissipation while ensuring durability, thereby improving the service life and performance of the entire light.
At the same time as internal sealing, glue is injected into the back wire position to form a full seal. Prevent moisture from entering and lights can be used in any weather.
Comes with necessary washers, bolts, and nuts for installation. Each light has a foam pad, which can be used to mark the positions that need to be drilled. The foam pad can also effectively protect the surface of the car.
White wire with "O" ring for ground, black wire is for low brightness running light/tail light/marker light. And red wire is for high brightness stop brake light/turn signals light.
Product Information
Product Information
Features & Specs
| Specific Uses For Product | Rear Lights |
|---|---|
| Light Source | LED |
| Compatible with Vehicle Type | UTV |
| Additional Features | Waterproof |
| Wattage | 3.2 watts |
| Auto Part Position | Rear |
| Automotive Fit Type | Universal Fit |
Additional details
| Lens Material | Polycarbonate |
|---|
Style
| Color | 4.4Inch Red 2Pcs |
|---|---|
| Lens Color | red |
Item details
| Brand Name | Nilight |
|---|---|
| Model Year | 1990 |
| UPC | 840323925471 |
| Manufacturer Part Number | TL-281R |
| Unit Count | 1.0 Count |
| Is Assembly Required | Yes |
| Manufacturer | Nilight |
| Set Name | 4.4 Inch Red Tail Light 2Pcs |
| Model Number | TL-281R |
| Item Type Name | LED Tail Light |
| Included Components | 2pcs tail light and foam pads, hardware pack |
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
