Related Video
About this item
- Awesome Brightness: Each tail light has 10PCS high-quality SMD LEDs to output super bright red light, high brightness for Turn/Brake light, and low brightness for Tail light, improving visibility and ensuring you a safer night.
- Easy Installation: The taillight comes with grommets for surface mount, also added a 3-prong watertight plug with attached wire. For installation, you just need to surface mount the grommets & light setup, and then connect the 3 wires to the corresponding wires on vehicles. The hole size for the surface mount is 6. 6” x 2. 5” x 1. 75”
- Upgraded Unique Design: Niligh's tail light has unique “ears” on its two sides, upgrade notches on the inside of the grommet, and a tighter attaching ability between the 3-prong plug and it. These help the light fit perfectly and firmly on the grommet, and the 3-prong plug attaches tightly to the light. Shake proof, there will be no worries of losing light or wires
- Ready For The Weather: Be highly silicon sealed, IP67 waterproof rating, and always be ready for different kinds of weather attacks
- Universal Application: Work on 12V DC system, function as turn/Brake light, tail light for all kinds of trucks, trailers, tractors, semi-trailers, horse trailers, travel trailers, dump trucks, special vehicles, etc. Just make sure the hole size before your purchase.

Nilight 6” Oval Trailer Tail Lights
Upgrade light safer night!
Nilight’s 6” Oval Trailer Tail Lights, each light has 10PCS high-quality SMD LEDs to output super bright red light. It comes with a surface mount grommet and standard 3-prong plug with attached wire for easy installation. Can work perfectly as a Turn/Brake light or Tail light for your vehicle.
- Light Color: Red
- Working Voltage: 12V DC
- Hole size for surface mount: 6.6” x 2.5” x 1.75”
- Upgrade design for firm installation
Product Display
High-quality SMD LEDs
Each tail light has 10PCS high-quality SMD LEDs to output super bright red light. Safe your night with bright light.
All in a set
The tail light comes with a surface mount grommet as well as the standard 3-prong plug with attached wires. All in a set for easy installation.
Surface Mount Hole Size
The hole size for the surface mount is: 6.6” x2.5” x 1.75”, remember to double-check it before your purchase.
Specifications
Ready For The Weather
The tail light is highly silicon sealed, IP65 waterproof rating, always be ready for different kinds of weather attacks.
Brightness
Double options of brightness, high brightness for Turn/Brake light while low brightness for Tail light.
Upgrade Design for Firm Installation
Has unique “ears” on the light's two sides, upgraded notches on the inside of the grommet, and a tighter attaching ability of a 3-prong plug, making sure it is shakeproof, with no worries of losing light or wires.
All Orders gets free standard delivery.
- Standard delivered 7-10 Business Days
- Express delivered 3-7 Business Days
Orders are processed and delivered Monday-Friday (excluding public holidays)
all customers enjoy free returns.
Proposition 65 Warning for California Consumers
WARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to www.P65Warnings.ca.gov/passenger-vehicle
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Related Products
3/4” Amber Red Round LED Marker Lights (10 Pcs)
6" Oval Amber LED Trailer Tail Lights (Pair)
2Gang Aluminum 5Pin ON/Off Rocker Switch Panel Green
4" 18W 1260LM Spot LED Pods (Pair)
Horizontal Bar Clamp Mount Bracket Kits 0.75"/1"/1.25" (Pair)
4.5" 27W Round Flood LED Work Lights (Pair)
5Pack 2Pin ON/OFF SPST Toggle Switch
12" 48 Leds Roof Top Amber Emergency Strobe Light
12" 48 Leds Roof Top Blue Red Emergency Strobe Light
12" 48 Leds Roof Top Blue Emergency Strobe Light
12" 48 Leds Roof Top Amber Mix White Emergency Strobe Light
2" Rear Bumper Tow Trailer Hitch Kit For 2007-2018 Jeep Wrangler JK
4.8" 18W Flush Mount Flood Led Work Lights (Pair)
3" 12W 1500LM Round Flood Built-in EMC LED Work Lights (Pair)
4.4" 48W 4780LM Square Flood Built-in EMC LED Work Lights (Pair)
Surface Mount Led Strobe Light Kit (8 Pcs)
12" 48 Leds Roof Top Amber White Emergency Strobe Light
12" 48 Leds Roof Top Red Emergency Strobe Light
12" 48 Leds Roof Top Red White Emergency Strobe Light
12" 48 Leds Roof Top Green Emergency Strobe Light
Very bright fit easily intoMy 2007 Tpyhauler. SlideThe oldOnes put, slide the new ones in and plug em in.. done. They work great!
These lights are a near-perfect fit to replace the trailer lights on my 2001 Eagle boat trailer. I did use the older rubber grommets as they fit better in the trailer. The original 3-point connectors were a perfect fit for the new lights. I basically removed and unplugged the old 2001 lights and plugged in and installed the new LED lights. It took about 5 minutes to complete the job. Nice!
I had a failing lamp on my toy hauler and looked for replacements locally. None in stock anywhere. These are much nicer than what came OEM. 2 rows of LED and very bright. Definitely recommend.
Perfect exact OE replacement. I bought second set based on quality, fitment and price for another trailer to convert it from incandescent to l.e.d
These lights are the best. The fit in the Channel without bottoming out, like the previous ones. This is due to the Wiring Plug goes to the side, not the back. Great Price.
Based on the lower price I was not sure on quality but purchased one box. The lights are much better than anticipated and I will purchase more to replace other trailer lights.
great price
Thanks all. I received my lights 16 hours after the purchase. Amazing.I purchased these lights to replace my boat trailer lights that had started taking on water. These utilized the existing wire connectors and fit into the existing rubber mounting grommets. I wanted to use the new mounting grommets but they are designed for thinner sheet metal mounting. They appear to be for ~16 gauge and my trailer is ~12 gauge thickness. They look good and shine bright. Very happy. Will update if these take on water. The description indicates water proof.