High Beam & Low Beam Dual Push Button Switch 12V ON Off Switches with Connector Wire Kit 1.28Inch x 0.87Inch Replacement for Toyota Sequoia Highlander Tacoma Tundra 4Runner RAVR Yaris

About this item

• Dual Push Button Switch: Dual on/off button 2-in-1 design, suitable for High Beam & Low Beam at the same time. The ON-OFF rocker switch with SPST design (single pole single throw) is manufactured to fit in the OEM switch blank for your cars. It comes with a small pigtail that plugs into the back of the switch for better installation.
• Cool LED Illumination: Built-in two premium LEDs emit soft light to illuminate the patterns on the switch, easy for you to find the switch in the dark.
• Wide Application: The switch is perfect for controlling LED Light Bar & Sport Lights, LED Light Bar & Off-Road Lights, Fog Lights & Reverse Lights, High Beam & Low Beam, Passenger Eject, Driving Lights, Horn, Tray Lights, Reverse Camera, Reverse Lights, etc. The switch is rated for 3 amps, you would need a relay if your lights are rated higher.
• Compatibility: Surface size 1.28 x 0.87 inch, compatible with Toyota Sequoia 2008-ON, Highlander 2008-ON, Tacoma 2012-ON (Center only), Tundra 2008-ON, 4Runner 2010-ON, RAV4 2008-2012, Yaris 2008. Please measure your present switches and compare the sizes.
• Package Includes: High Beam & Low Beam Dual Control Switch with connector wire kit and a wiring diagram.

12V High Beam & Low Beam Switch with Connector Wire Kit

• SPST design (Single Pole Single Throw)
• Built-in 2 Blue LEDs, laser-etched pattern
• Surface size 1.28inch x 0.87inch(33*22mm)

Mainly Used for Controlling Passenger Eject, Driving Lights, Tray Lights, ROOF Lights, Camping Lights, AUX Lights, Led Light Bars, Led Work Lights, Fog Lamps, Headlights, etc.

Package Include: 1 x High Beam & Low Beam Switch with wire connector kit, 1 x wiring diagram

Features

Easy Installation

This switch is simple to install, coming with a wiring connector, easy to connect by plug it into the switch, not needing the slightest effort.

Solid Construction

The switch is made out of heavy duty ABS plastic.It fits for most model Toyota's vehicles, such as Tacoma, FJ Cruiser, Fortune and some others.

Easy Wiring

Blue:Outgoing1 to relay,accessory or equipment

Red:To battery+ / ACC

Black:To Ground

Yellow:Dash light positive+

Green:Outgoing2 to relay,accessory

Cool LED Illumination

Built-in two premium LEDs emits soft light to illuminate the patterns on the switch, easy for you to find the switch in the dark.

NOTE:

1. The switch is rated at 3 Amps. A relay is necessary if your lights are rated higher.
2. Please measure the hole you want to place before placing an order, in order to make sure it fits your vehicle.