Motorcycle Brake Turn Signal Driving License Plate Rear Light For Harley Davidson Dyna Sportster 883 1200 Road King Glide Electra Heritage

• Worth Upgrading: With 60pcs high intensity LED chips, bright enough and over 50000 hours lifespan, increased rear visibility which is easier to notice by other vehicles on the road for safe driving
• Multiple Functions All in One: This movotor taillights can be used as running light, brake light, and turn signal light(turn left/right), also come with extra license plate light. All modes and functions are built together which are more practical than the original taillights
• Plug and Play: Easy to install within a few minutes, plug and play design, compared to others, we also upgrade the turn signal wire to a plug style, just plug 3 plugs to the corresponding position on the rear of your motorcycle to complete the installation, no need for any Hardwired
• Compatibility: Fits for Harley Sportster 883, Sportster 1200, Dyna, Tour Glides, Road Glides, Road Kings, All 1991-2010 FLST Models (except 1991-2000 FLSTF, 2005-2010 FLSTN, 1997-2003 FLSTS, 2005-2007 FLSTSC, 2010 FLSTSE); All 2002-2010 FXST Models (except 2002-2007 FXSTD, 2007-2009 FXSTSSE, 2008-2010 FXCW/C);1991-2010 Electra Glides (except 2005 FLHTCSE, 2009 FLHT Standard)
• Package Included: 1 PCS smoked housing LED tail light, 1 PCS Gasket, 2 Years Warranty Honored by Nilight

Multiple Functions All in One

Motorcycle LED Tail Light (Smoked Housing)

• Voltage: 12V DC
• LED Quantity: 60 LEDs
• Lens Color: Smoked Lens
• 4 Lighting Modes: running light, brake light, turn signal light (turn left/right), license plate light
• Package: 1 PCS LED Tail Light, 1 PCS Gasket

Key Features

Worth Upgrading

Different from traditional halogen taillights, it is cool smoked black and bright LED chips, with multiple functions. Taking into account good appearance and practicality.

Better waterproofing

In addition to a gasket to prevent water seepage, the electric board is fully covered with glue, instead of squeezing the glue to the outlet.

How to Install the Motorcycle Tail Lights?

Step 1

Remove the halogen tail light, paste the gasket to the frame.

Step 2

Insert the three plugs into the correct place.

Step 3

Tighten the tail lights with the factory screws.

Step 4

Power-on test each mode: running light, brake light, license plate light, left turn signal, right turn signal.

FITMENT