NAV/ANC Rocker Switch 7Pin Navigation Anchor Lights Toggle On Off DPDT Laser Etched 12V 24V Jumper Wires for ARB Carling NARVA Style Marine Boat Ship Vessel
NAV/ANC Rocker Switch 7Pin Navigation Anchor Lights Toggle On Off DPDT Laser Etched 12V 24V Jumper Wires for ARB Carling NARVA Style Marine Boat Ship Vessel is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Delivery and Shipping
Delivery and Shipping
International Shipping
Nilight is shipping worldwide covering North and South America, Europe, Asia, Africa, Oceania and more.
We employ the services of major, trusted international carriers to ensure your package arrives at your destination safely.
U.S. domestic orders are shipped from our USA warehouse for the fastest delivery times but exceptions may occur.
Shipping Time
U.S. domestic shipping: about 3-7 Working Days
International shipping: about 8-15 working days
A standard processing time of up to 48 hours is required before the order is shipped out.
Due to challenges posed by the pandemic, our carrier is temporarily experiencing shipping delays, which may delay your delivery. We are always work to get your package to you as quickly and safely as possible.
Shipping Cost
We offer free shipping on all of our products to customers in the Continental U.S. when orders over $19.99. Customers in other regions need to pay additional shipping costs(Specific amount please kindly refer to your checkout page).
Tracking
Your tracking number will be sent in email immediately after we ship the order out. You may follow the link in the email to check the estimated arrival time of your order.
(Please note that tracking information will only be updated online in 1 working day after your order has been shipped.)
Product Description
Product Description
- Easy To Install And Use: 7 pin on off on rocker switch with DPDT design (double pole double Throw), rated at 20AMP/12VDC and 10AMP/24VDC. Can be installed or replaced on the original rocker switch panels. It is easy and simple to set up. Can control 2 loads
- Wide Applications: Mainly used to controlling the navigation lights and anchor lights. 3 positions (ON -OFF-ON). Universal fit for Marine boats, Yachts, cars, RVs, SUVs, ATVs, UTVs, Cans, Buses, Trailers, rerunners, Campers, Caravans etc
- Sturdy And Durable: Made of high-quality plastic and well-conductive pins; ensure long lasting durability, highly optimized for general use and will give you a pleasant experience
- Multiple Security Protection: Output circuit protection, overload protection, reverse polarity protection. Built in two premium LEDs. Safer and more convenient to use
- Package Includes: A 7 pin nav/anc switch, jumper wires set and a wiring diagram
Features
Nilight NAV/ANC Rocker Switch
- Material: Superior ABS+PC, DPDT design, this on off on switch can control 2 loads; Built-in 2 LEDs;
- Product Size: 1.9 inch(48.3mm) x 1.04 inch(26.3mm).
- Mounting Hole Size: 1.43 inch(37mm) x 0.84 inch(21.3mm).
- Fits most cars, SUVs, ATVs, UTVs, 4X4, motorcycles, trucks, Jeep Wranglers, boats, yachts, and other off-road vehicles.
- Mainly used together with wiring harness to control Winch, Pump, Horn, Reclining Media Room Seats, Auto Bilge Pump, or led work lights, headlights, taillights, etc.
The upper light is on when the switch is pressed, and it stops working when let it off.
The lower light is on when you press the switch down, and it will return off position when you remove your finger.
The switch is very flexible for turning on or off. Automatic rebound when finger released. It can stand up to 10,000 times pressing under normal use.
This switch is simple to install, product comes with a wiring diagram which make it easy to wire the jumper wires in two seconds.
High quality 14 gauge jumper wires, the Tin-plated copper terminals on the wire is of good stability, wear resistance, corrosion resistance.
Made of ABS and PC of premium quality, the switch is impact and heat resistant. DPDT design, this on off on switch can control 2 loads.
The 7 pin rocker switch can be installed on Nilight rocker switch holder housing for better using effect.
It can also be replaced to any defective 7 PIN switches. Convenient and cost-effective.
Product Specification
Product Specification
Features & Specs
| Operation Mode | ON-OFF-ON |
|---|---|
| Current Rating | 20 Amps |
| Operating Voltage | 12 Volts |
| Contact Type | Normally Open |
| Connector Type | Plug In |
| Switch Type | Rocker |
| Terminal | Spade |
| Circuit Type | 2-way |
| Mounting Type | Panel Mount |
| Number of Positions | 2 |
| Lower Temperature Rating | 1 Degrees Celsius |
| Upper Temperature Rating | 1 Degrees Celsius |
| Control Method | Push Button |
| Wattage | 240 watts |
| Compatible with Vehicle Type | Cars, SUVs, ATVs, UTVs, 4X4, Motorcycles, Trucks, Boats, Yachts, Off-Road Vehicles |
| Control Type | Mechanical (Rocker) |
| Compatible Devices | Cars, SUVs, ATVs, UTVs, 4X4, Motorcycles, Trucks, Wranglers, Boats, Yachts, Off-road Vehicles |
Additional details
| Color | Red |
|---|
Measurements
| Item Dimensions | 2.36 x 2.36 x 1.97 inches |
|---|---|
| Unit Count | 1.0 Count |
| Number of Items | 1 |
Materials & Care
| Material Type | Acrylonitrile Butadiene Styrene |
|---|---|
| Contact Material | Copper |
User guide
| International Protection Rating | IP64 |
|---|---|
| Specification Met | CE |
Item details
| Brand Name | Nilight |
|---|---|
| Model | 90796B |
| Manufacturer | Nilight |
| UPC | 840323974011 |
| Part Number | 90796B |
| Included Components | A 7 PIN Switch |
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
