300% Brightness H4 LED Headlight Bulbs:60W,10000 lumens per pair,6000k cool white, Nilight headlight features customized CSP chips that effective lighting range can up to 500ft. Compared with halogen bulbs,300% brightness and 55% energy saving. Super focused beam pattern without dark spot.
Efficient Cooling System & No Fan: The aviation aluminum shell for maximum speed up the heat dissipation,multi-groove heat sink, and intelligent temperature control chip increased the efficiency of heat dissipation.Working lifespan Maximum up to 50000 hours. The fanless design doesn’t make any noise or radio interference.
Easy to Install: No modification required,1:1 ratio same luminous position as the standard halogen bulbs.Built-in EMC system to ensure zero radio interference. Non-polarity sensitive, Mini size design can perfectly fit into the vehicle’s housing. Easy to install the headlight in 10 minutes.Plug and Play!
CAN-bus Ready: Built-in LED driver can match with 98% vehicle's computer system without error, CANbus will prevent flicking and on-dash error, full power with every turn-on. Some sensitive models may require an additional decoder.
Buy With Confidence: Pack of 2 LED headlight bulbs, User manual, We strive to make our customers 100% satisfied,worry-free customer service. Please confirm your needed bulb size. If any problems, please feel free to contact us.
Nilight H4/9003/HB2 LED Headlight Bulb
Optimal choice for safe driving at night
Application:Upgrade stock dim 9003,HS1,H4 H/L beam halogen bulb or xenon HID, daytime running light (DRL) even fog light to LEDs for truck,car,ATV,UTV,motorcycle.
Cross reference number:H4,9003,HB2,HS1,H4 H/L,H4-3,R2(need to buy extra bracket holder) etc.
Bulb base:P43t,PX43t,not fit P30t,P36t,P38t,P45t.
Operating Voltage:DC 12V
Heat Sink Material:aviation aluminum 6063
Operating Temperature: -104℉~+ 185℉
55% Engery Saving
1:1 Ratio Size
Latency-free Instant Start
Efficient Cooling System
Super Focused Beam Pattern and High Light Output-Nilight led headlight features advanced LED CSP chips technology for the best lighting performance in night.Super focused light without dark spot nor glare to the oncoming drive.Make sure your driving safely.
Farther and Wider
3mm thickness of led distance on the both side,almost deploy 360 degree uniform light in projector and bring a clear cut off line.Result a perfect beam pattern to see farther and wider.
Upgraded Intelligent Driver
360°adjustable locker design for adjusting the beam angle on some models like Ford,Honda,Chevrolet.If produce an improper light beam found,adjust and get the perfect beam pattern.
Better Night Visibility
Customized led CSP chips that output 300% brightness than halogen,maximum the effective lighting range up to 500ft+.Safer driving light replacement,light your way at night.
Whole aviation aluminum heat sink and smart temperature control,ensure the efficiency of heat dissipation. Extending the lifespan up to 50,000 hours.IP67 Waterproof level to ensure good performance in the most extreme conditions.
All Orders gets free standard delivery.
Standard delivered 7-10 Business Days
Express delivered 3-7 Business Days
Orders are processed and delivered Monday-Friday (excluding public holidays)
These lamps illuminate without flicker or any unusual indications when being powered as Daytime Running Lights (at least in one Toyota, where 12 volts are supplied when in DRL mode).
In a 1999 Toyota Camry, these lamps and heat sinks are small enough to fit without any need to remove e.g. the lamp housing or the battery. The factory rubber seal boot (with a central round hole) fits around the lamp behind the locking ring and in front of the heat sink without any modification. One headlamp had been replaced due to collision damage, and that aftermarket rubber seal boot (originally with no central perforations other than three slots for the electrical spade connectors) needed to be modified:
- to cut a central round hole for the lamp body (obviously), and
- to trim about 1 mm in depth from the front of the cylindrical portion of the gasket (as the original depth could not be compressed enough to allow the LED lamp to slide far enough into the locking ring to be rotated to the correct installed position).
Illumination and beam pattern are satisfactory. I just hope the description should have honestly stated *minimum* (or at least median) 50,000 hours life. If they go dark after one week of use, that would satisfy the maximum 50,000 hour life as stated on the web page. At least the Instruction Manual that comes with the product states Lifetime >= 50,000 hours.