Front Bumper Kit B For 2007-2018 Jeep Wrangler JK
: In stock
Regular price $329.99

Related Video
About this item
- Heavy Duty Construction: Our front bumper is manufactured from a heavy-duty 5/32" steel sheet and 2" x 0.120" steel tubing for superior strength and durability, Giving your car a tougher look & 360° Protection.
- OEM Fog Lights Housing: This front bumper with built-in Fog Lights is Housing so that you can install your OEM Fog Lights directly, No Modifications are Required (Fog lights not included).
- Shackle Mount and D-Rings: Two solid D-ring shackle mounts are welded into the front bumper from the inside and outside for increased strength. Include two 4.75 Ton D-Rings, the total capacity is 9000 lbs. Built-in winch plate. Enhance the looks and provide points for vehicle recovery and a place to mount a winch. Direct bolt-on replacement of original bumper. No cutting or drilling is required.
- Corrosion Resistance Finish: Two-stage finish using E-Coat pre-coating and high-grade textured black powder coating for long-lasting corrosion resistance.

Nilight 2007-2018 Jeep Wrangler JK Front Bumper
With OE Fog Lights Housing and Winch Plate
Heavy Duty Construction
Manufactured from 5/32" mild steel plating and 2"x 0.120" tubing, this Bumper is completed in a two-stage finish using epoxy pre-coating and high-grade textured black powder coating for long-lasting durability
Perfect For Off-Road Use
Featuring OEM Fog Lights Housing, an integrated 10 x 4.5" winch mount that is capable of supporting a 12,000 lb winch, The Bumper is perfect for off-road use. Each bumper is equipped with two 3/4 inch pin d-rings able to handle a load of 9,500lbs
Features

OE Fog Light Housing
Nilight bumpers relocate the stock fog lights to widen their field of vision. You can install your OEM Fog Lights directly, No Modifications are Required (Fog lights not included).

D-Rings & Isolators
Strong D-ring mounts are welded both on the inside and outside. Two 4.75-ton D-ring shackles are included.

Corrosion Resistance Finish
Two-stage finish using epoxy pre-coating and high-grade textured black powder coating for long-lasting corrosion resistance.

Full protection front bumper
Manufactured from heavy-duty 5/32" steel and 2" x 0.120 wall steel tubing. Welded hoop protects the front of the car in collisions.

Built-in 10*4.5'' Winch Plate
Built-in winch plate support all brands of winches rates 12,000 lb. Two tabs on the pre-runner hoop for extra off-road lights.

Bolt-on Installation
This Front Bumper bolts onto the factory holes, no additional drilling or cutting is required. all mounting hardware and instruction are included.
All Orders gets free standard delivery.
- Standard delivered 7-10 Business Days
- Express delivered 3-7 Business Days
Orders are processed and delivered Monday-Friday (excluding public holidays)
all customers enjoy free returns.
Proposition 65 Warning for California Consumers
WARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to www.P65Warnings.ca.gov/passenger-vehicle
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Related Products
Universal Bottom Angle Adjustable Mount Brackets (Pair)
4" 18W 1260LM Spot LED Pods (Pair)
Horizontal Bar Clamp Mount Bracket Kits 0.75"/1"/1.25"/2" (Pair)
12" 72W 5000LM Double Row Spot/Flood Led Light Bar
Slide Mount Base Brackets (Pair)
32" 180W Double Row Spot/Flood LED Light Bar
4" 18W 1260LM Double Row Spot LED Pods (2 Pairs)
4" 18W 1260LM Flood Led Pods (Pair)
5Pin Laser On/Off Rear Lights Rocker Switch Blue
6.5" 36W 1260LM Double Row Flood Led Light Bars (Pair)
20" 126W Double Row Spot/Flood Led Light Bar Kit | 12FT Wire
Universal Side Mount Brackets w/ Rubber Pad (Pair)
4" 60W Triple Row Spot/Flood LED Pods (Pair)
4.8" 18W Flush Mount Flood Led Work Lights (Pair)
31" 150W 14500LM Slim Spot/Flood Led Light Bar
Universal Slide Base Mount Bracket (Pair)
LED RGB Rock Lights Bluetooth Underglow Multicolor Neon (4 Pods)
5Pin Laser On/Off Sasquatch Light Rocker Switch Blue
Horizontal Bar Clamp Mount Bracket Kits 0.75"/1"/1.25" (Pair)
25" 162W Double Row Spot/Flood LED Light Bar
4" 18W 1260LM Double Row Flood LED Pods (2 Pairs)
17" 108W Double Row Spot/Flood Led Light Bar
4" 18W Double Row Flood LED Pods (Pair) | 16AWG Wire 3Pin Switch
20" 126W Double Row Spot/Flood LED Light Bars (Pair)
14AWG DT Connector Wire Harness Kit 1 Lead W/ 12V On-Off Switch
2Pcs 12V 3Pin On Off Rocker Switch
Horizontal Bar Clamp Mount Bracket Kits 1"/1.5"/1.75"/2" (2 Pairs)
5Pin Laser On/Off LED Light Bar Rocker Switch Blue
4.8" 42W Flush Mount Spot/Flood Led Work Lights (Pair)
22" 120W Double Row Spot/Flood LED Light Bar
👍
Great quality, a few minor surface defects that can be easily fixed.
Looks great, nice and sturdy
Excellent quality and fit
Very nice bumper . Easy for one person to install if you watch You Tube. I think it took me longer to fine nuts + bolts in my garage to remount my fog lights. (did not come with bumper). Install was much faster and easy. There is 1 video that says if you open up the wire loom on the fog/parking lights you can get enough wire to relocate in the new bumper, it works. I am happy with it and next week I have the rear bumper coming. Just added 20" light bar
No place for my license plate
Easy to install. Great bumper for the money. Very study built.
Easy one person install
Bumper is great and easy to install! Would recommend!