Related Video
About this item
- Heavy-Duty Rear Protection: This Bumper was designed to add protection to your precious Jeep’s lower rear end while providing it with superior towing capabilities with its heavy-duty D-rings. It also gives your vehicle an attractive upgrade in its appearance for added style.
- Perfect For OFF-ROAD Use: Give your 2018+ Jeep Wrangler JL the adventurous styling of years past with this Nilight Rear Bumper. Featuring 2X40W Nilight Upgraded LED Lights, two high-strength D-Ring mounts, and a 2" standard receiver hitch this Nilight Rear Bumper is perfect for off-road use.
- Extremely Bright: Built-in 2pcs 40W Nilight Upgraded New Design Flush Mount LED Pods. They brighten up the road, perfect for any nighttime adventure.
- Easy, Bolt-On Installation: This Nilight Mid-Width Rear Bumper is also designed with ease of use and installation in mind. Thanks to its convenient bolt-on solution, this bumper installs quickly and easily without requiring any modification to your vehicle.
- What You Get: Buy At Nilight, You Earn What You Buy! You Get All The Things You Need: 1X Jeep Wrangler Rear Bumper, 2 x 40W Nilight Upgraded Flush Mount LED Pods, 2Pcs 4. 75ton D-ring isolator for free, 1 x Set of Screws, 1 x DIY Installation Manual, 2 Years Nilight and Lifetime Best Customer Service. The packaging is specially designed and tested to avoid your package being damaged during transportation.

Nilight 18-19 Jeep Wrangler JL Rear Bumper
w/ 2X18W Nilight Upgraded LED Lights & 2" Hitch Receiver D Rings
Heavy Duty Construction
Manufactured from 3/16" mild steel plating this Rear Bumper is completed in a two-stage finish using epoxy precoating and high-grade textured black powder coating for long-lasting durability. The D-Ring mounts are welded both inside and outside for extra strength.
Perfect For Off-Road Use
Featuring 2X18W Nilight Upgraded LED Lights, two high-strength D-Ring mounts and a 2" standard receiver hitch, this Rear Bumper is perfect for off-road use.
Features

Bolt-on Installation
This Rear Bumper bolts onto the factory holes, no additional drilling or cutting is required. all mounting hardware and instruction are included.

D-Rings & Isolators
Strong D-ring mounts are welded both on the inside and outside. Two 4.75-ton D-ring shackles are included.

Corrosion Resistance Finish
Two-stage finish using epoxy pre-coating and high-grade textured black powder coating for long-lasting corrosion resistance.

Accommodates Up to a 37" Tire

2" Standard Hitch Receiver

2x 18W Nilight Upgraded New Design Flush Mount LED Pods
All Orders gets free standard delivery.
- Standard delivered 7-10 Business Days
- Express delivered 3-7 Business Days
Orders are processed and delivered Monday-Friday (excluding public holidays)
all customers enjoy free returns.
Proposition 65 Warning for California Consumers
WARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to www.P65Warnings.ca.gov/passenger-vehicle
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Related Products
Universal Bottom Angle Adjustable Mount Brackets (Pair)
4" 18W 1260LM Spot LED Pods (Pair)
Horizontal Bar Clamp Mount Bracket Kits 0.75"/1"/1.25"/2" (Pair)
12" 72W 5000LM Double Row Spot/Flood Led Light Bar
Slide Mount Base Brackets (Pair)
4" 18W 1260LM Double Row Spot LED Pods (2 Pairs)
32" 180W Double Row Spot/Flood LED Light Bar
4" 18W 1260LM Flood Led Pods (Pair)
5Pin Laser On/Off Rear Lights Rocker Switch Blue
6.5" 36W 1260LM Double Row Flood Led Light Bars (Pair)
20" 126W Double Row Spot/Flood Led Light Bar Kit | 12FT Wire
Universal Side Mount Brackets w/ Rubber Pad (Pair)
4.8" 18W Flush Mount Flood Led Work Lights (Pair)
4" 60W Triple Row Spot/Flood LED Pods (Pair)
31" 150W 14500LM Slim Spot/Flood Led Light Bar
Universal Slide Base Mount Bracket (Pair)
LED RGB Rock Lights Bluetooth Underglow Multicolor Neon (4 Pods)
5Pin Laser On/Off Sasquatch Light Rocker Switch Blue
Horizontal Bar Clamp Mount Bracket Kits 0.75"/1"/1.25" (Pair)
25" 162W Double Row Spot/Flood LED Light Bar
4" 18W 1260LM Double Row Flood LED Pods (2 Pairs)
17" 108W Double Row Spot/Flood Led Light Bar
4" 18W Double Row Flood LED Pods (Pair) | 16AWG Wire 3Pin Switch
20" 126W Double Row Spot/Flood LED Light Bars (Pair)
14AWG DT Connector Wire Harness Kit 1 Lead W/ 12V On-Off Switch
5Pin Laser On/Off LED Light Bar Rocker Switch Blue
2Pcs 12V 3Pin On Off Rocker Switch
4.8" 42W Flush Mount Spot/Flood Led Work Lights (Pair)
Horizontal Bar Clamp Mount Bracket Kits 1"/1.5"/1.75"/2" (2 Pairs)
22" 120W Double Row Spot/Flood LED Light Bar
I bought these open box and put them on my tractor. Way cheaper then new bulb holders (they got brittle and broke my tractor is older) and bulbs by a lot. I wired right in to the existing harness, super easy way brighter then stock!
Obviously doesn’t compare to Baja’s or KCs but for a budget option- they’re perfect. I have bought lights, wiring, and switches from nilight and haven’t had any major problems. My only issues are the watt draw(and therefore the lumen output) at least on their bigger lights, is lower than advertised- but still plenty bright; and either the lights or the wiring cause radio interference in my truck(11th gen f150). But still would definitely recommend for those who don’t want to blow hundreds on lighting.
Nothing I don't like about them. I used them on my 4 wheeler
So far so good, I pair this pods with nilight mounts… so far so good, lets see if they hold with time, good value for the money, the light output is not compared with a high end high $$ pods, but for what I need them this should do it.
The media could not be loaded. I have not installed them yet. But i got 3 sets of the lights and wiring. Im ordering 3 sets of the round light bar clamps so they will go on easily on all 3 of my 4 wheelers. They are very bright and will be perfect for night time when 4 wheeling or just cruising. I am also gonna order the ones that have side lights attched and cant wait to try those.
The media could not be loaded. Seems easy to install and wire and well made also good price
Easy to install. Bought 2 for my bumper last year and have held up well so bought 2 more to install on windshield post. Great value for the price