Nilight 60inch 108 LEDs Single Row Tailgate Light Bar with Brake Light Reverse Light & Flash Red Turning signals, 1 Year Warranty

: In stock

$19.99 $35.99

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question

Related Video


About this item

  • Incredible Brightness: The Redline LED Tailgate Bar has 108 LEDs that shine 35% brighter than normal chips and ensure your car can be seen even in the thickest traffic, day or night.
  • Flexible & Durable Led Lights: IP67 sealed housing, well protects LED strips against raindrops, snow, dirt, and sand, super durable and flexible with up to 30,000 hrs. lifespan
  • No Drilling Required: it comes with a tough-as-nails adhesive enhancer that increases hold strength by over 5X. No need to drill, it will not fall off, included mounting hardware for more secure installation.
  • Mounting Anywhere With 12V Power Source: 60" LED strips, rated 12V, ultra-long for cargo/pickup/camper/garage/RV Awning lighting or household party decoration.
  • Multiple Use - widely used in Truck Bed Light, RV Awning Light, Step Bar LED Lighting, Side Door Led Lamp, Pickup Bed Light Kit, etc. Ideal for DIY. And wide use for Jeep Pickup Truck RV SUV.

Nilight 60inch 108 LEDs Single Row Tailgate Light Bar

Specifications

  • Multi-functions: Running light, braking light, turning signals, reversing light
  • Color: Red/ White
  • Working Voltage: 12V DC
  • Light Source:108LED 24-26LM/LED
  • LED Strip Length: 60 inches
  • Materials: LED Chip+Silicone

Features

5 Full Functions


5 Full Functions

5 Full Lighting Modes: Drive with dark red running lights, bright red braking light, flash bright red turn signals, and white reverse light.

Durable For All Seasons


Durable For All Seasons

Being fully silicon-sealed and flexible, it can withstand any bad weather and harsh environment.

Awesome Brightness


Awesome Brightness

264LED with a double-row LED design, makes the lumen output is 200% brighter than the normal single-row LED

To Install

(Firstly be sure to decide whether the wire bundle needs to be towards the driver side or passenger side by testing when signals lights work properly.)


Peel


Peel

After cleaning and drying the mounting surface. Peel off the adhesive tape at the back.

Stick


Stick

According to the mounting direction of the wire bundle, stick the light bar to the recessed area between the bottom of the tailgate and the bumper shelf.

Electrical Hook-up


Electrical Hook-up

Plug and play the standard flat 4-pin connectors, and connect the reverse wire to a 12V DC positive power source.

Additional Hardware

Additional Hardware

You can also add on additional mounts and screws we provide to secure the light bar.

*Updates: New package will come with 3 clear brackets for more secure installation.


tailgate light bar

All Orders gets free standard delivery.

  • Standard delivered 7-10 Business Days
  • Express delivered 3-7 Business Days

Orders are processed and delivered Monday-Friday (excluding public holidays)


all customers enjoy free returns.

Proposition 65 Warning for California Consumers

WARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to www.P65Warnings.ca.gov/passenger-vehicle

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Nilight 60inch 108 LEDs Single Row Tailgate Light Bar with Brake Light Reverse Light & Flash Red Turning signals, 1 Year Warranty

$19.99 $35.99

Customer Reviews

Based on 12 reviews
83%
(10)
17%
(2)
0%
(0)
0%
(0)
0%
(0)
S
Silas Cremin
Spectacular

My only complaints was that yes the flat 4 was too small but I had to buy an extension because with this particular one the wiring was reversed as the left turn signal is wired to the right side. LUCKILY I double checked it before sticking it to my truck. ALSO the power wire for the reverse lights is WAY undersized and wouldn't work until I actually soldered it to another 14 guage wire

O
Oceane Legros
Works great on my Versahaul motorcycle carrier

The motorcycle blocks the SUV lighting (when I use the hitch mount carrier), so I was looking for a simple, inexpensive solution. This works great. I use the heavy duty Versahaul motorcycle carrier , but imagine it would work on any motorcycle carrier. I do not have the reverse light connected..but I was only looking for turn signals and brake lights. Pigtail is about 35" and plugs into my 4 prong with almost no slack.

A
Albina Weissnat
Easy to install and very bright

Product was easy to install. 3m tape holds well. It is a true plug and play. Took about 15 mins to clean install area and put light strip on. Very bright and increases visibility at night. Good product and would buy again

D
Dante Champlin
Good product, however does not fit the 2020 Ram 1500

I had these same lights for 2018 Ram 1500 Big Horn and loved them. Traded truck in for 2021 1500 Big Horn and went to put lights on and low and behold. The mounting surface is totally changed from the 2018. The light manufacturer NiLite needs to very the fit as clearly by the pics they won’t work

E
Edmund Koepp
Eh... ok....

Had to cut and tie into the rear wire harness. It's a plug and play install but it looks awful. I spent a few hours playing with the wiring and got it looking clean. I'd buy it again. The lights are bright. Just don't be a moron when installing it and ruin your harness.

A
Abelardo Nicolas
Extra lights on the back of my camper

Nice and brite, used it on the back of my camper love it.

P
Providenci Hill
Looks and works beautifully

I really like the look it gives to my 2020 Ford F-150, and it was vary easy to install.

D
Dulce Schuppe
Shave their connector down with a razor just a bit. Put them next to each other and then you’ll see!

Install was easy until you connect the flat 4 plug that doesn’t fit. I just shaved it down with a razor blade carefully until it would connect. Not to difficult, just annoying because it’s brand new. It’s been around a month now with a few 8 hour drives and no problems at all! 4 stars from me!!

A
Aylin Homenick
Great LED Taillights

Very easy to install, they look great and are really bright. Great value for the money.

O
Olen DuBuque
Great value and look

Great look adds character to the truck. The install was very easy total time 30 minutes. This is a no brained for the price point. If your looking to add this to your truck I recommend you get it.