Motorcycle Handlebar Switch Plug and Play 12V ATV Light Switches Dual Push Button Waterproof ON Off for UTV Driving Lights Fits 22mm Handlebars
Motorcycle Handlebar Switch Plug and Play 12V ATV Light Switches Dual Push Button Waterproof ON Off for UTV Driving Lights Fits 22mm Handlebars is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Delivery and Shipping
Delivery and Shipping
International Shipping
Nilight is shipping worldwide covering North and South America, Europe, Asia, Africa, Oceania and more.
We employ the services of major, trusted international carriers to ensure your package arrives at your destination safely.
U.S. domestic orders are shipped from our USA warehouse for the fastest delivery times but exceptions may occur.
Shipping Time
U.S. domestic shipping: about 3-7 Working Days
International shipping: about 8-15 working days
A standard processing time of up to 48 hours is required before the order is shipped out.
Due to challenges posed by the pandemic, our carrier is temporarily experiencing shipping delays, which may delay your delivery. We are always work to get your package to you as quickly and safely as possible.
Shipping Cost
We offer free shipping on all of our products to customers in the Continental U.S. when orders over $19.99. Customers in other regions need to pay additional shipping costs(Specific amount please kindly refer to your checkout page).
Tracking
Your tracking number will be sent in email immediately after we ship the order out. You may follow the link in the email to check the estimated arrival time of your order.
(Please note that tracking information will only be updated online in 1 working day after your order has been shipped.)
Product Description
Product Description
About this item
- Universal fit: Nilight handlebar switch fits for any handlebar of 7/8inch diameter such as most 12V motorcycles, bicycles, scooters, ATVs. It has a nice heavy duty wire jacket that was long enough to reach behind the headlight
- Installation: There is a 3 PIN connector in the pigtail of the switch. Enables this switch to be connected to the Nilight 3PIN wiring harness kit without cut and splice the wires. If you want to connect the lights directly to the switch without the 3PIN connector, just cut it and splice the wires according to your installation needs
- Material: This motorcycle handlebar switch is made of CNC aluminum alloy and plastic, The silicone sleeve around the switch enable it to be waterproof,weatherproof and dustproof. No worrying of splitting, flaking off and breaking, supporting a long term application
- Application: Can be used to control Headlights,aux driving lights,LED lights, LED work lights, rear lights, fog lights, driving lights, taillights, off-road lights,etc
- Operation: Simple SPST on off switch. The LED only illuminated when switch is on. eliminate any power draw from the battery when vehicle is not in use, disconnects the battery safely
Motorcycle 7/8inch Handlebar Dual Switch with Connector
- Working Voltage: 12V DC
- Switch Operation: On Off
- Switch Material: CNC aluminum alloy
Fitment:
Nilight handlebar switch fits for any handlebar of 7/8inch（22-23mm） diameter such as most 12V motorcycles, bicycles, scooters, and ATVs. It has a nice heavy-duty wire jacket that was long enough to reach behind the headlight.
Features
It is designed and can be applied for the diameter of 7/8inch grips.Can be used to control headlight,driving light,LED light,fog light,off-road light,etc
CNC Aluminum Billet + Silicone Rubber + 3 Copper Wires,made of CNC Aluminum Alloy and Plastic support long term use.
Enables this switch to be connected to the Nilight 3PIN wiring harness kit directly by plugging the connector to the Nilight wiring harness.
The switch surrounding is wrapped in silicone. Protect the circuit from water or foggy. Works Great on Foggy or Rainy days.
Product Specification
Product Specification
Features & Specs
| Operation Mode | ON-OFF |
|---|---|
| Current Rating | 1 Amps |
| Operating Voltage | 12 Volts |
| Contact Type | Normally Closed |
| Connector Type | Clamp |
| Switch Type | Push Button |
| Terminal | Spade |
| Circuit Type | 2-way |
| Mounting Type | Handlebar Mount |
| Actuator Type | Push Button |
| Number of Positions | 1 |
| Upper Temperature Rating | 50 Degrees Celsius |
| Controller Type | Push Button |
| Control Method | Touch |
Additional details
| Color | Motorcycle Handlebar Switch-Dual Control |
|---|
Measurements
| Item Dimensions | 1.57 x 1.97 x 2.76 inches |
|---|---|
| Unit Count | 1.0 Count |
| Number of Items | 1 |
Materials & Care
| Material Type | Acrylonitrile Butadiene Styrene |
|---|---|
| Contact Material | Aluminum |
User guide
| International Protection Rating | IP67 |
|---|---|
| Specification Met | / |
Item details
| Brand Name | Nilight |
|---|---|
| Model | 90275B-A |
| Manufacturer | Nilight |
| UPC | 840323906180 |
| Part Number | 90275B-A |
| Included Components | Motorcycle 7/8" Handlebar Switch |
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
