Well made and easy to install.

Good quality! So easy to instal

very very reliable and works great!!

Ordered this to replace the old switch panel in my boat, was way easier to install than the last panel where you had to cross between every fuse. Just ground all of your accessories and then run one single wire to each switch. One positive one negative to the panel and that powers every switch.

This unit has 15amp fuses, 20amp switches and 16 gauge wire. I bought this mainly to power a compressor fridge freezer unit and to monitor my auxiliary battery state of charge from the cargo area of my yukon. The mounting plate is good quality and the hole sizes are pretty standard so you can replace failed components easily. Many people will want to rewire this to meet their needs but beware that the blade terminals come off very hard. In fact I broke the voltmeter and the guts fell out. I was able to super glue it back together. The wire is very thin gauge so I wired the 12v socket up independently with 12 gauge wire and its own 15 amp fuse. Don't plan on powering anything with high power consumption. It was pretty cheap and you get what you pay for but it fits my needs.

Used this on my boat to straighten up some wires and be able to turn off things is wasn't using them. Turned out very nice and I'm please with it so far.

Installed on a new console on our pontoon boat, works great, very easy to install, love to volt guage. The mounting screws are beginning to rust

Installation facile et good look !

Well built and easy install

The only thing I don’t like is the constant drain on the battery from the volt meter and USB port. I wrote them to a switch to keep the feature but not the drain. I like the switch board and that each circuit has a fuse. It is a good product