About this item
15 Mins Installation: OE Standard headlights for 2009-2018 Dodge Ram 1500 / 2010-2018 Dodge Ram 2500 3500 (Only fit factory quad style halogen headlights; Don't fit: 2010-2018 Dodge Ram models with factory projector LED-style headlights), Plug-N-Play Design, No Modification or Drilling Needed
Waterproof: IP65-rated and completely sealed to prevent moisture from intruding into the housing. The ventilation Hole regulates temperature to avoid fogging and keep the headlights bright and clear
Safe Drive: Provides clearer and longer vision for the driver to see the deer, wild animals, falling rocks, or other obstacles at night in advance to reduce the possibility of danger
DOT Compliance: DOT & SAE compliant to ensure driving safety for you and oncoming drivers. Also, the adjusting screw can assist you to adjust the beam level and make it a perfect fit
Packages: Includes driver's side and passenger's side. (Bulbs are NOT included) Save all the hassle, damage and high cost of refurbishing your old headlights, a new set of headlight assembly would be your best option
Vehicle Fitment
2009 Dodge Ram 1500
2010 Dodge Ram 1500 / 2500 / 3500 / 4500 / 5500
2011 Dodge Ram 1500 / 2500 / 3500 / 4500 / 5500
2012 Dodge Ram 1500 / 2500 / 3500 / 4500 / 5500
2013 Dodge Ram 1500 / 2500 / 3500 / 4500 / 5500
2014 Dodge Ram 1500 / 2500 / 3500 / 4500 / 5500
2015 Dodge Ram 1500 / 2500 / 3500 / 4500 / 5500
2016 Dodge Ram 1500 / 2500 / 3500 / 4500 / 5500
2017 Dodge Ram 1500 / 2500 / 3500 / 4500 / 5500
2018 Dodge Ram 1500 / 2500 / 3500 / 4500 / 5500
2019 Dodge Ram 1500 Classic (Only for Quad Models)
2021 Dodge Ram 1500 Classic (Only for Quad Models)
2022 Dodge Ram 1500 Classic (Only for Quad Models)
For 2009, Fit New Body Style Models Only, Does Not Fit Old Body Style Models
Not fit: 2010-2018 Dodge Ram models with factory projector LED-style headlights
If necessary, please turn to a professional installer.
Key Feature
Headlight Detail
OE Number: FO2502147 / FO2502183 / XC3Z13201BA / 1C3Z13008BA
Signal Light: 3157A
High Low Beam: 9007 (Bulbs Not Included)
Plug & Play Installation
No Additional Modification or Drilling
Waterproof & Dustproof
Brings a new look to your vehicle
Increases visibility of road markings, traffic signs, and wild animals
Gives you and your family safer nighttime driving
Upgraded strong sealing, ensure excellent waterproof & dust-proof
Scientific vent design to avoid moisture
Easy to exhaust, anti-fogging.
100% OE Standard, just Plug & Play
DOT & SAE to ensure full illumination and maximum safety
Upgrade Material To meet or exceed the OE ones in function upgraded materials, which are UV & shock-resistant to prevent yellowing or cracking for a longer lifespan
Strictly Test
Temperature & Humidity Test
To ensure that the unit can withstand a wide range of temperature without reduce light output safety.
Dust Test
To ensure the unit is preperly sealed against harmfull road dust and debris.
Salt Spray Test
To ensure that the unit can withstand against oxidation caused by salt on the coastal area and from winter condition.
Moisture Test
To ensure that the unit do not cause moisture buildup leading to reduce visibility.
Common Causes Of Headlamp Condensation
1. Large changes in daily temperature (+/-30℃/105℉)
2. Water vapor easily collects as dew point or humidity increases I
3. Leaking seals on bulbs and/or bulb sockets
This is a common occurrence and won’t affect the headlight function
How To Solve:
1. Check that all vents are free from blockages. Turn on the low beam for 20 mins to raise the headlight temperature and evaporate condensation.
2. Remove bulbs to allow moisture to evaporate from inside the housing. Heat with a hairdryer or heat gun at a low temperature to speed up the process.
3. Leaking seals on bulbs or bulb sockets. Put moisture-absorbing silica-gel desiccant packet inside the headlight.